SKP

SKP company amusement filling Castle installation and maintenance methods, industry news-SKP company

by:SKP     2020-01-26
One. Inflatable Castle installation 1. Installation of inflatable air mold: 1 Place the inflatable air mold on a flat ground, preferably with a pad cloth (Such as felt, plastic striped cloth), And then expand it. 2 find the air inlet of the inflatable air mold, connect it with the air outlet of the fan, tie the fan Port tightly, and then tie the spare air inlet with a rope. 3 Turn on the blower, the equipment is in 5-It will bulge in 10 minutes. 2. Installation of supporting fans: 1. Select national standard 1. 5mm2- 4 mm2 the cable is connected to the fan for several meters, and the other end is connected to the air switch, and the electric shock protector is connected. 2 before using, check whether the power supply voltage is consistent with the nameplate and whether the rotation direction is correct. 3 The casing should be connected to a reliable ground wire and checked regularly. The air inlet of the fan should be pressed to the protective net to avoid accidents. 3. Cleaning Collection of inflatable air mold: 1 cut off the power supply, turn on the fan interface and exhaust port, and the exhaust time is generally 10-25 minutes, the remaining gas should be squeezed. If the equipment is flooded due to rainy days, be sure to drain the water and dry it for cleaning. Use washing powder to wipe off the stains and oil stains, then scrub them with clear water and dry them in the sun. 3 fold the equipment, block the front with the bottom surface, and cover it with a tarpaulin. If it is not used for a long time, fold, bundle and pack the clean equipment. The storage temperature is generally-50 ~ 40 degrees Celsius is appropriate. 5 fans should pay attention to moisture and corrosion. Air model equipment should pay attention to anti-rat insect bite. Two. Maintenance method of inflatable castle 1. In order to ensure that your equipment reaches the normal service life, you cannot participate in too many children's play when starting up. Generally, it can accommodate 3 m² children on the air mold. 2. The small shape on the facility plays a decorative role and cannot be pulled or torn hard by children to avoid damage. 3. When children play, they should not be allowed to scribble on the equipment with hard objects to avoid damage. 4. In case of equipment damage, special glue can be coated on the damaged place and spare PVC material for glue. Do not stick your hands after 5 minutes, glue them, squeeze them properly, and use them in a few minutes. 6. The air pressure on the equipment is too soft, check if there is too much air leakage, tearing holes, or power failure; The air pressure is too hard to block the air inlet of the fan. Three. Advanced machine for making inflatable air mold 1. Cutting bed: this is a rare machine for amusement equipment manufacturers in Jiangsu, Zhejiang and Shanghai. There is a fan under the cutting bed that can absorb the air under the material to make it flat and easy to cut the inkjet printer: the pattern printed by our inkjet printer is fine and does not fade, and when detecting, a dollar coin can be used to scrape back and forth on the inkjet pattern. It will be found that the pattern is still intact without this influence. Four. Notes on inflatable air Model 1. Children are strictly prohibited (3-6)Play thrilling projects. Avoid children playing with older children at the same time to avoid collisions. 2. Managers should arrange for children to play according to the rules of the game to avoid accidents. 3. In case of strong winds (Level 4 or above) Rain, snow, fog, hail and other weather, equipment is strictly prohibited in the outdoor open air to avoid accidents. Seven, inflatable castle scope of application: schools, kindergartens, gardens, villas, parks, property communities, playgrounds, children's palaces, shopping malls, supermarkets and other indoor and outdoor places for children to play and entertain
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...