Bumper Car requirements for venues, industry news-SKP company

First, how to choose the right bumper car? When the vehicle is placed, try to put the same bumper car together. Do not put the plush electric toy car and bumper car in the same venue. The plush electric car is easy to be knocked down by the bumper car; The vehicles put together should be of the same model as far as possible, so as to avoid too large a size difference and prevent them from losing balance during collision. Second, the selection requirements of the site: you must choose a smooth and smooth use of the site, flat cement floor, tile floor, marble floor, etc. , the ground has cracks or spacing will cause poor ride comfort, it may also cause the failure or damage of electronic components, as well as the damage of the frame, the breakage of the motor output shaft and the breakage of the wheel. Rough ground is easy to cause excessive wear of wheels, and the replacement frequency of wheels, especially driving wheels, will increase accordingly. The site should be horizontal, and the slope should not exceed 10 degrees. If the slope is too large, it is easy to cause the bumper car to go up the slope. The main reason is that the speed is too fast to control when going downhill. There should be no ditches or pools around the site. When there are ditches and pools, comprehensive protective measures must be taken to avoid damage to vehicles and dangerous accidents. The area of the operating site is not as large as possible. The large area of each bumper car is not more than 10 square meters, and the small area is not less than 5 square meters. The operating site has a special inflatable fence or guardrail, prevent pedestrians from entering and colliding with vehicles to avoid economic losses. There should be no sharp metal parts or edges on or around the ground of the business site to prevent the damage of sharp objects to the car body and the damage of the inflatable ring.