How to maintain small playground equipment to effectively prolong its service life, industry news-SKP company

The plastic part and glass fiber can be diluted and soaked with soapy water, disinfectant washing powder, bleaching powder, etc. , then scrubbed with a soft cloth or soft brush, then rinsed with water, dried or dried with a cleaning cloth, and finally sprayed with 84 disinfectant for disinfection. The soft sponge part can be brushed with soft cloth and soapy water, or placed in the sun for disinfection. Moisture-resistant, heat-resistant, non-fading wooden parts can be soaked in soapy water and dried in the sun, and then sprayed with 84 disinfectant for disinfection. If the metal part is required to be rusted, use a brush to remove the floating rust and wipe it with a dry cloth; After being exposed to the Sun, the colorless Sanhe brand self-spraying paint can be swept and sprayed once at a distance of about 20 cm, and then sprayed again after drying to protect it, wash, dry and disinfect the paint after it is completely dry. When cleaning the electrical parts of the naughty Fort circuit, first ensure that the power is cut off, and no watering is allowed. Generally, it is scrubbed with a damp cloth, and then connected to the power supply after it is dry. All amusement equipment, open slides and drill tubes should not have accumulated water after rainy days. If so, a hole with a diameter of 4mm should be made at the lowest place to drain water. If it is an indoor activity room, floor, wall, etc. , it should be disinfected by ultraviolet radiation every day, and the room should be ventilated regularly, and hydrogen peroxide should be sprayed and disinfected once a week. At the same time of disinfection, it is necessary to check whether the connection part is firm, whether the metal frequently moves the connection part to refuel, and whether the circuit appliances and common parts are damaged.