Inflatable swimming pool bracket pool, industry news-SKP company

Trouble and elimination of inflatable swimming pool: 1. Product repair: Apply glue evenly on the cloth, then air it for half a minute, stick the cloth sample to the pasting place, flatten it without warping, and paste it. 2, the product is cut: the scratch is longer than 5cm should be stitched with needle and thread, and then pasted with cloth or cloth sample; The stroke is less than 5cm and can be directly pasted. 3, the product seam opening: first use the needle and thread to sew the opening flat, or disassemble from the bottom of the air cushion to enter and sew, you can use the paste method to handle the opening firmly, while considering the appearance. 4, beautification and warping: Use a small brush to apply a proper amount of glue on the edge of the edge, after a short stop, press it flat and press it firmly. 5. Degumming of products: some easily worn parts are easy to degumming after long-term use. Cloth can be cut into different shapes and pasted at the degumming place. 6. Large amount of air leakage of the product: after the toy is used for a long time, due to the large seam of the pinhole in some parts, the air leakage is greatly increased. It can be considered to stick the cloth strip to the seam to reduce the air leakage, if the toy is too old, it should be considered for scrapping to prevent problems in the operation. 7. Local abnormal bulge of the air cushion of the product: Generally speaking, the internal towel is torn from the air cushion, the bottom of the air cushion can be disassembled along the seam, and the lacing is connected with the air cushion with needle and thread, then paste with cloth strips to protect the seams.