Product use and installation method 1, open the package, please follow the instructions, check whether the spare parts of the car are complete, if you have any questions, please call: 0371-- 558163012, the battery must first add battery liquid (1. 28 dilute sulfuric acid) , Must add stock solution, large barrels of the kind, manufacturers are not equipped with battery liquid, because dilute sulfuric acid is corrosive, can not be shipped, so you need to buy in the local hardware store, or repair the car where to buy. 3, plush installation, screw a 12*600 long screw rod in the middle of the robot, insert the plush in the screw rod, just put it on, the handlebar is inserted on the shaft in the middle of the front wheel. 4, the shed is installed, 2 long steel pipes are inserted in the pipe behind the seat, press the shelf, put on the tarpaulin, and fix the shed. 5, after the battery is added with liquid, the battery will generate 40% of the electricity, you can try the car first, put the battery below ,( Because some customers go back to their own batteries, the battery size is uncertain, so the battery is not fixed for the time being), Plus battery clip, red positive, Black negative. 6, after adding the battery, use the start key in the keyhole (Back panel) Poke it, pull it out, the music sounds, step on the pedal, and you can walk. 7, battery charging, charger is 12v intelligent charger, red clip clip positive, black clip plus negative, charging time is generally 7 ~ 8 hours.