Proper maintenance of children's inflatable amusement equipment, industry news-SKP company

  First, children's inflatable amusement equipment installation steps and skills  (1)First, put a pad on the flat ground (Such as plastic striped cloth or felt), Place the inflation equipment, and then expand.     (2) Find the air inlet of the equipment, connect it with the air outlet of the fan, and tie the fan mouth tightly. In the country, the country is set up. The standby information network reminds you that at this time, the spare air inlet must be tightened with a rope. Turn on the fan and the equipment will blow up within five to ten minutes.     Second, the correct maintenance of equipment storage:  (1) First of all, cut off the power supply and turn on the fan interface and exhaust port. The exhaust time is generally 10-25 minutes, the remaining gas is artificially squeezed. If you catch up with rainy days, the equipment may enter the water. Be sure to check carefully. If there is water, drain the water and dry it.     (2) If there is no water in the inspection equipment, the water outside the equipment should also be cleaned and cleaned. The stains and oil stains can be wiped off with washing powder, then cleaned with clear water and dried in the sun.     (3) Fold the equipment, fold the front with the bottom surface, and cover it with a tarpaulin. If it is not used for a long time, fold, bundle and pack the clean equipment. The storage temperature is generally at minus 50 degrees Celsius to minus 40 degrees Celsius, preferably 26y. China- Amusement equipment, equipment information network to remind you that the fan should pay attention to moisture and corrosion. Air model equipment should pay attention to anti-rat insect bite