Repair methods for inflatable castles, industry news-SKP company

Guangzhou Haibei amusement inflatable castle repair method first apply glue evenly on the place where the toy is to be pasted and the cloth, then dry it for half a minute, paste the cloth sample to the pasting place, flatten it without warping the edge, and paste it. 2, the toy was cut 1) The stroke is longer than 5cm and should be sewn with needle and thread, and then pasted with cloth strip or cloth sample 2) The scratch is less than 5cm and can be directly pasted. 3. The seam opening is first sewn flat with needle thread ,(Or disassemble from the bottom of the air cushion and sew it) , Can be pasted to handle the opening firmly, while considering the appearance. 4. Use a small brush to apply a proper amount of glue on the edge of the beautification. After a short stop, press it flat and press it firmly. 5. The degumming part is easy to wear, the cloth can be cut into different shapes and pasted at the degumming place. 6. After the toy with large air leakage is used for a long time, the seam of pinholes in some parts is widened and the air leakage is greatly increased, it can be considered to stick cloth strips on the seams to reduce air leakage. If toys are too old, scrap should be considered to prevent problems in operation. 7. The local abnormal bulge of the air cushion generally refers to the tearing of the towel from the air cushion. The bottom of the air cushion can be disassembled along the seam, the lacing is connected to the air cushion with a needle and thread, and then pasted with a cloth strip, protect the seam.