What should be paid attention to in the maintenance and maintenance of inflatable castles after leaving the factory? , Industry news-SKP company

SKP company amusement manufacturers remind you of the maintenance and maintenance of inflatable castles after leaving the factory? First, the use of methods 1. Place it in a ventilated place. If you use it for the first time, there will be a lot of smell when you open it. This is due to the reason of sealing and storage after the product is produced. It is a normal phenomenon, it is recommended that you wash it with shower gel water once and then place it in the center of outdoor ventilation. The smell will naturally dissipate. 2. Do not overfill the inflation. Too much inflation in the inflatable swimming pool will reduce the service life. It is recommended that the inflation should be maintained between 80% and 90%. After inflation, it is recommended to put a layer of cloth or other things under the swimming pool before use, avoid sharp stones from abrasion and air leakage. 3. The amount of water added should not be too high. The more water added to the swimming pool, the greater the swelling force, which will cause a little deformation of the inflatable swimming pool. This is also a normal phenomenon. It is recommended that the amount of water added should not exceed 60% of the total height or the water level alert line. 4. Pay attention to the use environment. If it is used in a low temperature environment, it is recommended to leave it indoors for more than 10 hours before use, so as to avoid material hardening due to low temperature and damage under external force. 5. Regular QI, any inflatable products will see natural air leakage, which is a normal phenomenon. It is recommended to stop Qi again after a period of time. 6. To prevent exposure to the Sun, the inflatable swimming pool is not a water storage product. It is strictly forbidden to be exposed to the sun for a long time after being filled with water. The pool body is not deformed. When it is not used, the air is released and placed in a ventilated place.