Disinfection standards for children's amusement equipment, industry news-SKP company

The children's play area is a place with more people, and there are more bacteria in places with more people, especially when the season changes and the weather is hot, this weather season of hand, foot and mouth disease is more likely to occur. In this regard, children's amusement equipment manufacturers believe that all employees and teachers must pay more attention to the sanitation and disinfection work of the kids playground than usual, and make the disinfection work of children's amusement equipment standard, comprehensive and meticulous, in order to protect the health of children! What is the disinfection standard for children's amusement equipment? The following is a brief introduction to the specific operation of amusement equipment disinfection by children's amusement equipment manufacturers. 1. For those plastic parts and glass fibers, we can dilute and soak them with soapy water, disinfectant washing powder, bleaching powder, etc. , and gently scrub them with a soft cloth or a soft brush, rinse with water, dry with a cleaning cloth or dry in the sun. Finally, spray some 84 disinfectant. 2, if it is indoor activity room, floor, wall, etc. , daily ultraviolet radiation disinfection, indoor ventilation. Spray and disinfect with hydrogen peroxide once a week. 3. For the soft sponge part of large children's amusement equipment, we can scrub it with soft cloth dipped in soapy water. Children's amusement equipment manufacturer 4. For the metal part of large children's amusement equipment, if rust is required, brush can be used to remove floating rust and wipe it with dry cloth. 5, moisture-resistant, heat-resistant, non-fading wooden parts, can be soaked in soapy water and dried in the sun, and then sprayed with 84 disinfectant to disinfect 6. When cleaning the circuit and electrical parts, first ensure that the power is cut off and no watering is allowed, generally, it is scrubbed with a damp cloth, and then connected to the power supply after drying. 7. All large children's amusement equipment, open-air slides and drill tubes should not have accumulated water after rainy days. If so, a hole with a diameter of 4mm should be made at the lowest place to drain water. 8. For the disinfection of large children's amusement equipment, be sure to check whether the connection part is firm, the metal is frequently active, the connection part is refueled, the circuit appliances and common parts are damaged, and all parts cannot leave spikes and other safety hazards.

Most places have a few choices when it comes to kids play equipment indoor playground distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of indoor play area is critical to kids play equipment.

Through our culture, our drive and the expertise of each individual employee, Guangzhou Smart Playground Equipment Co.,Ltd is uniquely positioned to provide best-in-class services to a global customer base.

Guangzhou Smart Playground Equipment Co.,Ltd provides innovative technology and prompts our customers to know the development of our producing indoor playground.

The only cardinal rule with adding animation is to keep high-quality on indoor play area.

It's not enough to have an idea as indoor playground in a gigantic market. The key to what gets concerned is how you connect this hungry market to the idea that satisfies it.